| Peer-Reviewed

Mechanical Properties of Zirconia-Titanium Composites

Received: 19 September 2014     Accepted: 25 September 2014     Published: 30 September 2014
Views:       Downloads:
Abstract

This study aims to investigate mechanical properties of ZrO2-Ti composites. The samples have been fabricated by spark plasma sintering (SPS). The experimental results demonstrate that a small amount of ZrO2 can enhance Ti matrix in hardness and tensile strength, while a large amount of ZrO2 degrade the tensile strength and ductility because of high extent of formation of titanium oxide. The mechanical properties of ZrO2-Ti composites can be related to thermo-mechanical behavior of ZrO2/Ti functionally graded materials (FGMs). In the FGMs, titanium oxide has also formed, which can largely influence thermo-mechanical behavior of the FGMs.

Published in International Journal of Materials Science and Applications (Volume 3, Issue 5)
DOI 10.11648/j.ijmsa.20140305.28
Page(s) 260-267
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

ZrO2-Ti Composites, Titanium Oxide, Functionally Graded Materials (FGMs), Spark Plasma Sintering (SPS)

References
[1] A.W. Nugroho, G. Leadbeater, I.J. Davies, “Processing of a porous titanium alloy from elemental powders using a solid state isothermal foaming technique,” J. Mater. Sci Mater Med, 2010, vol. 21, pp. 3103-3107.
[2] T. Lidong, L. Wenchao. “Residual stress analysis of Ti-ZrO2 thermal barrier graded materials,” Mater Design, 2002, vol.23, pp. 627-632.
[3] R.C. Gravie, R.H. Hannink, R.T. Pascoe, “Ceramic steels,” Nature, 1975, vol. 258, pp.704–730.
[4] P.M. Kelly, L.R.F. Rose, “The martensitic transformationin ceramics- its role in transformation toughening,” Prog Mater Sci, 2002, vol. 47, pp. 463–557.
[5] H. Tsukamoto, “Micromechanical modeling of transformation toughening in multi-phase composites enriched with zirconia particles,” Comp Mater Sci, 2010, vol. 48, pp. 724–729.
[6] H. Tsukamoto, “Design against fracture of functionally graded thermal barrier coatings using transformation toughening,” Mater Sci Eng A, 2010, vol. 527, pp. 3217–3226.
[7] H.Tsukamoto, “Analytical method of inelastic thermal stresses in a functionally graded material plate by a combination of micro- and macromechanical approaches,” Compos Part B-Eng, 2003, vol. 34, pp. 561-568.
[8] K. Kokini, J. DeJonge, S. Rangaraj, B. Beardsley, “Thermal shock of functionally graded thermal barrier coatings with similar thermal resistance,” Surf Coat Tech, 2002, vol. 154, pp. 223–231.
[9] Z. Han, B. Xu, H. Wang, S. Zhou, “A comparison of thermal shock behavior between currently plasma spray and supersonic plasma spray CeO2–Y2O3–ZrO2 graded thermal barrier coatings,” Surf Coat Tech, 2007, vol. 201, pp. 5253-5256.
[10] L.D. Teng, F.M. Wang, W.C. Li, “Thermodynamics and microstructure of Ti-ZrO2 metal-ceramic functionally graded materials,” Mater Sci Eng A, 2000, vol. 293, pp. 130-136.
[11] L.D. Teng, W.C. Li, F. M. Wang, “Effect of Ti content on the martensitic transformation in zirconia for Ti-ZrO2 composites,” J Alloy Compd, 2001, vol. 319, pp. 228-232.
[12] K.L. Lin, C.C. Lin, “Reaction between titanium and zirconia powders during sintering at 1500oC,” J Am Ceram Soc, 2007, vol. 90, 2220-2225.
[13] T.A. Schaedler, O. Fabrichnaya, C.G. Levi, “Phase equilibria in the TiO2-YO1.5-ZrO2,” J Euro Ceram Soc, 2008, vol. 28, pp. 2509-2520.
[14] B.C. Weber, H.J. Garrett, F.A. Mauer, M.A. Schwartz, “Observations on the stabilization of zirconia,” J Am Ceram Soc, 1956, vol. 39, pp. 197-207.
[15] A. Arias, “Thermal shock resistance of zirconia with 15 mol %Titanium,” J Am Ceram Soc, 1966, vol. 49, pp. 334-338.
[16] M. Omori, “Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS),” Mater Sci Eng A, 2000, vol. 287, pp. 183-188.
[17] H. Tsukamoto, T. Kunimine, M. Yamada, H. Sato, Y.Watanabe, “Microstructure and mechanical properties of Ti-ZrO2 composites fabricated by spark plasma sintering,” Key Eng Mat, 2012, vol. 520, pp. 269-275.
Cite This Article
  • APA Style

    Hideaki Tsukamoto. (2014). Mechanical Properties of Zirconia-Titanium Composites. International Journal of Materials Science and Applications, 3(5), 260-267. https://doi.org/10.11648/j.ijmsa.20140305.28

    Copy | Download

    ACS Style

    Hideaki Tsukamoto. Mechanical Properties of Zirconia-Titanium Composites. Int. J. Mater. Sci. Appl. 2014, 3(5), 260-267. doi: 10.11648/j.ijmsa.20140305.28

    Copy | Download

    AMA Style

    Hideaki Tsukamoto. Mechanical Properties of Zirconia-Titanium Composites. Int J Mater Sci Appl. 2014;3(5):260-267. doi: 10.11648/j.ijmsa.20140305.28

    Copy | Download

  • @article{10.11648/j.ijmsa.20140305.28,
      author = {Hideaki Tsukamoto},
      title = {Mechanical Properties of Zirconia-Titanium Composites},
      journal = {International Journal of Materials Science and Applications},
      volume = {3},
      number = {5},
      pages = {260-267},
      doi = {10.11648/j.ijmsa.20140305.28},
      url = {https://doi.org/10.11648/j.ijmsa.20140305.28},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20140305.28},
      abstract = {This study aims to investigate mechanical properties of ZrO2-Ti composites. The samples have been fabricated by spark plasma sintering (SPS). The experimental results demonstrate that a small amount of ZrO2 can enhance Ti matrix in hardness and tensile strength, while a large amount of ZrO2 degrade the tensile strength and ductility because of high extent of formation of titanium oxide. The mechanical properties of ZrO2-Ti composites can be related to thermo-mechanical behavior of ZrO2/Ti functionally graded materials (FGMs). In the FGMs, titanium oxide has also formed, which can largely influence thermo-mechanical behavior of the FGMs.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Mechanical Properties of Zirconia-Titanium Composites
    AU  - Hideaki Tsukamoto
    Y1  - 2014/09/30
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ijmsa.20140305.28
    DO  - 10.11648/j.ijmsa.20140305.28
    T2  - International Journal of Materials Science and Applications
    JF  - International Journal of Materials Science and Applications
    JO  - International Journal of Materials Science and Applications
    SP  - 260
    EP  - 267
    PB  - Science Publishing Group
    SN  - 2327-2643
    UR  - https://doi.org/10.11648/j.ijmsa.20140305.28
    AB  - This study aims to investigate mechanical properties of ZrO2-Ti composites. The samples have been fabricated by spark plasma sintering (SPS). The experimental results demonstrate that a small amount of ZrO2 can enhance Ti matrix in hardness and tensile strength, while a large amount of ZrO2 degrade the tensile strength and ductility because of high extent of formation of titanium oxide. The mechanical properties of ZrO2-Ti composites can be related to thermo-mechanical behavior of ZrO2/Ti functionally graded materials (FGMs). In the FGMs, titanium oxide has also formed, which can largely influence thermo-mechanical behavior of the FGMs.
    VL  - 3
    IS  - 5
    ER  - 

    Copy | Download

Author Information
  • Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan

  • Sections